PRE-FAULT ANALYSIS: AN APPLICATION OF GAUSS-SEIDEL ITERATIVE METHOD TO 330KV TRANSMISSION GRID SYSTEM IN NIGERIA

  • M. O. Okelola Ladoke Akintola University of Technology, Ogbomoso, Oyo State, Nigeria
  • A. A. Yusuff Ladoke Akintola University of Technology, Ogbomoso, Oyo State, Nigeria
  • C. O.A. Awosope University of Lagos, Nigeria.

Abstract

Pre-fault condition of fault analysis is a load flow studies. A MATLAB program was developed to use gauss-seidel iterative method of approach for solving load flow equations in determining the performance of the Nigerian National Electric Power Authority (NEPA) 330kV transmission grid system. The code was to be effective as the voltage profile of the bus is bars is within the standard acceptable range.

Author Biographies

M. O. Okelola, Ladoke Akintola University of Technology, Ogbomoso, Oyo State, Nigeria

Department of Electronic and Electrical Engineering, Faculty of Engineering and Technology

A. A. Yusuff, Ladoke Akintola University of Technology, Ogbomoso, Oyo State, Nigeria

Department of Electronic and Electrical Engineering, Faculty of Engineering and Technology

C. O.A. Awosope, University of Lagos, Nigeria.

Department of Electrical and Electronics Engineering

Published
2005-02-02
How to Cite
Okelola, M., Yusuff, A., & Awosope, C. (2005). PRE-FAULT ANALYSIS: AN APPLICATION OF GAUSS-SEIDEL ITERATIVE METHOD TO 330KV TRANSMISSION GRID SYSTEM IN NIGERIA. LAUTECH Journal of Engineering and Technology, 3(2), 8-15. Retrieved from https://www.laujet.com/index.php/laujet/article/view/195
Issue
Vol 3 No 2 (2005): Vol. 3 No. 2
Section
Articles